MGS-150

MGS-150

Commercial Refrigerant Detector

  • Infrared, electrochemical and MOS sensor options
  • Detects CFC, HCFC, HFC, refrigerants, oxygen, toxic and combustible gases
  • Selectable current or volt analog output
  • IP66 housing options, including remote and duct mount sensors
  • Built-in relay with adjustable set-point

Description

The MGS-150 Gas Detector can meet almost any gas detection need with multiple sensor options for real-time monitoring of refrigerants, oxygen, combustible and toxic gases. It includes user-selectable current or volt analog outputs, allowing connectivity to most BMS, SCADA or central control systems. Status LEDs and a buzzer are integrated for local alarming while an onboard relay with user-adjustable set-point can connect to external visual/audible alarms.

A variety of enclosure options, including an economical IP41 housing and a dust/water tight IP66 housing, allow the MGS-150 transmitters to be placed in the toughest environments. Special remote sensor configurations are available for applications where mounting in vent pipes, duct work or other tight spaces is required.

Specifications

 
Type  Gas detector using IR, electrochemical or semiconductor sensors
Gases          Refrigerants:            Ammonia, Carbon Dioxide, Hydrocarbons, and HFCS, HCFCS, CFCS
Combustible gases:   Methane, Propane, Butane, LPG, and Hydrogen
Toxic gases:             Ammonia, Carbon Dioxide, Carbon Monoxide, Chlorine, Hydrogen Chloride, Hydrogen                                                 Cyanide, Hydrogen Sulfide, Nitric Oxide, Nitrogen Dioxide, Ozone, Sulfur Dioxide, and Oxygen
MeasuringRange*    ppm, %LEL or Vol%
Status Indicators Green and red LEDs
Analog Output 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V
Power Supply 12/24 VDC or 24 VAC; 4-wire
Audible Alarm 85 dB buzzer
Relay 1 alarm relay, SPDT
Rating 1 A @ 24 VDC / 24 VAC, resistive load
Alarm delay 0, 1, 5, or 10 minutes; user-selectable
AmbientConditions*  Temperature              IP41 - 4 to +122 °F (- 20 to +50 °C)
                               IP66 - 40 to +122 °F (- 40 to +50 °C)
Humidity                   0 to 95 %RH, non condensing
Altitude                     0 to 10,000 ft (3,050 m)
Enclosure Ex d; Copper Free Aluminum
Size (w x h x d)          Approx.*             IP41 3.35” x 5.59” x 2.09" (86 x 142 x 53 mm)
IP66 6.89” x 6.5” x 3.29” (175 x 165 x 82 mm)
Ex d 5.51” x 7.09” x 3.54” (140 x 180 x 90 mm)
Weight Approx. * IP41 6.3 oz (180 g)
IP66 22 oz (629 g)
Ex d 9.3 lbs (2.2 kg)
Approvals CE, UL, CSA, IEC, EN 61010-1

 

 * See datasheet for details

Visitors: 19,686